About the Port of Ploce
The Port of Ploce is a multi-purpose terminal situated in Croatia on the coast of Croatia, in northwestern Europe. Its operating coordinates of 43.0500° latitude and 17.4333° longitude place the port in maritime temperate waters — a region historically anchoring the Hanseatic trade routes and today serving as the principal gateway between Asia–Europe container services and the European hinterland. Like other multi-purpose terminals in this part of the world, the harbour is built around the handling of a flexible mix of general cargo vessels, project carriers, heavy-lift ships, and break-bulk tonnage. Mobile harbour cranes, mafi trailers, and conventional slings handle non-containerised steel, machinery, forestry products, and oversized industrial components.
PortWatch identifies this facility under UN/LOCODE HRPLE, the five-character country-and-port identifier maintained by the United Nations Economic Commission for Europe (UNECE). The first two characters (HR) denote Croatia under ISO 3166-1, and the trailing three characters resolve to the specific port location. UN/LOCODEs are used universally in carrier booking systems, customs filings such as the European ENS and U.S. AMS, electronic data interchange under UN/EDIFACT, and the IMO FAL Convention single-window architecture. When you see this code on a bill of lading, sea waybill, or container terminal pre-advice, it always refers to the same physical port no matter which carrier or freight forwarder issued the document. The full UN/LOCODE registry can be searched at UNECE UN/LOCODE registry.
Across the most recent reporting cycle PortWatch shows 1 distinct vessels associated with the Port of Ploce. The active mix at this terminal is dominated by 1 refrigerated cargo vessel. Looking at this composition tells operators a great deal about the port’s real-world specialisation: a heavy bias toward container tonnage points to a port deep in the global liner network, with weekly fixed-day services and on-dock rail; a leaning toward bulk and tanker calls usually means the port serves nearby industrial customers — power stations, refineries, steel mills, agricultural exporters — whose berthing windows are negotiated through long-term contracts of affreightment rather than through the spot market.
The vessel position estimates shown above are derived from publicly broadcast AIS (Automatic Identification System) data. AIS uses VHF transceivers carried aboard SOLAS-class vessels to broadcast static information (vessel name, IMO, MMSI, type, dimensions) and dynamic information (position, course, speed, heading, navigational status) on a continuous schedule. Coastal receivers and satellite constellations aggregate these broadcasts into the public datasets that PortWatch and similar directories consume; a more technical overview is published at the public AIS overview at NavCen.
If you are researching the Port of Ploce for a specific commercial purpose — diverting a shipment around a labour disruption, comparing carrier coverage between competing gateways, or monitoring the build-out of a new terminal — the PortWatch profile is intended as a fast first pass rather than the definitive source of record. For berthing-window depth and air-draft constraints, refer to the most recent edition of Lloyd’s Ports of the World, the port authority’s own published handbook, or the Notice to Mariners issued by the relevant national hydrographic office. For live operational status during a port call, use your shipping line’s vessel agent or the port community system (PCS) credentials issued to your forwarder. PortWatch aggregates and republishes public reference data; it does not replace pilotage information, hydrographic charts, or formal port operational publications.